983-WH11-403

View detailed technical data, stock status, and sourcing information for: 983-WH11-403
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 983-WH11-403 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-498-8836

Item Name Code

60828

Assigment Date

07/03/2002 (24 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

steel and steel corrosion resisting overall material, 1.937 inches nominal diameter, this part is made up of sub-items 28,32, and 34;item 28 is a plunger shaft bearing with internal diameter of 1.250 in and height of .078 in;item 32 is drive shaft plunger with a 0.373 in (nominal) shaft with a 0.165 in (thru) hole located 0.160 in from end of shaft;item 34 is a bearing retainer with overall diameter of 1.312 in;end item's nsn is 2320-01-413-3739 special features, 2.174 inches nominal length

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Diameter: 1.937 inches nominal
Length: 2.174 inches nominal
Special Features: this part is made up of sub-items 28,32, and 34;item 28 is a plunger shaft bearing with internal diameter of 1.250 in and height of .078 in;item 32 is drive shaft plunger with a 0.373 in (nominal) shaft with a 0.165 in (thru) hole located 0.160 in from end of shaft;item 34 is a bearing retainer with overall diameter of 1.312 in;end item's nsn is 2320-01-413-3739
Material: steel and steel corrosion resisting overall

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
983-WH11-403	Detent Plunger

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-498-8836?

The FSCG of the NSN 5340-01-498-8836 is 5340

Does NSN 5340-01-498-8836 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-498-8836 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-498-8836 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-498-8836 was assigned to the Federal Catalog?

It was assigned 24 years ago, on Wed, Jul 3, 2002