160D950825-15

View detailed technical data, stock status, and sourcing information for: 160D950825-15
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 160D950825-15 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Nonmetallic Fabricated Materials

Federal Supply Classification

9330 Plastics Fabricated Materials

National Stock Number

9330-01-502-3014

Item Name Code

19975

Assigment Date

10/31/2002 (23 years ago)

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

not fire retarding fire retarding characteristic, 4.000 inches nominal thickness, 18.500 inches nominal width, aircraft, thunderbolt ii, a-10 end item identification, 25.440 inches nominal length

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Fire Retarding Characteristic: not fire retarding
Width: 18.500 inches nominal
Thickness: 4.000 inches nominal
Length: 25.440 inches nominal
End Item Identification: aircraft, thunderbolt ii, a-10
Surface Condition: rough
Density Rating: 1.2 pounds per cubic foot
Compression Strength At 25 Pct Deflection: 0.35 pounds per square inch minimum
Part Name Assigned By Controlling Agency: filler foam
Special Features: "roughly rectangular: top/long edge tapers 1.00 toward each side edge; there is a bean shaped cutout near center with left end having radius of 3.00 centered 5.00 inches from left edge & 10.25 from top & right end with radius of 3.50 centered 12.72 from left & 7.63 from top; marked "fwd up" at center top & with part number in lower right corner"
Material: plastic polyurethane
Supplementary Features: material to be reticulated foam per sm-alc specification ms-mmrs-87-100

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
160D950825-15	Cellular Plastic Material

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 9330-01-502-3014?

The FSCG of the NSN 9330-01-502-3014 is 9330

Does the NSN 9330-01-502-3014 have a Schedule B code assigned?

Yes, the Schedule B code is 3921190000

Does NSN 9330-01-502-3014 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 9330-01-502-3014 contain precious materials?

Item does not contain precious metal.

Does NSN 9330-01-502-3014 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 9330-01-502-3014 was assigned to the Federal Catalog?

It was assigned 23 years ago, on Thu, Oct 31, 2002