9281-1

View detailed technical data, stock status, and sourcing information for: 9281-1
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 9281-1 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5330 Packing and Gasket Materials

National Stock Number

5330-00-253-2217

Item Name Code

04522

Assigment Date

01/01/1963 (63 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

solid single or composition cross-sectional shape style, 2.438 inches nominal overall width, 0.594 inches nominal aperture diameter, 0.406 inches nominal hole diameter, 1.750 inches nominal bolt circle diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Cross-Sectional Shape Style: solid single or composition
Hole Diameter: 0.406 inches nominal
Bolt Circle Diameter: 1.750 inches nominal
Overall Width: 2.438 inches nominal
Aperture Diameter: 0.594 inches nominal
Outside Corner Radius: 0.344 inches nominal
Side Radius From Gasket Center: 0.594 inches nominal
Cross-Sectional Thickness: 0.031 inches nominal
Bolt Hole Quantity: 2
Material: cellulose overall
Style Designator: non-circular

Replaces National Stock Numbers

Below is a list of NSNs that have been officially superseded by this NSN:

NSN	Name	Date
2815-00-356-1402	No Name Available	03/03/1967
2815-00-600-7046	No Name Available	01/01/1963

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
24745	Gasket
9281-1	Gasket
H9281-1	Gasket

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5330-00-253-2217?

The FSCG of the NSN 5330-00-253-2217 is 5330

Does NSN 5330-00-253-2217 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5330-00-253-2217 contain precious materials?

Precious metal content is unknown

Does NSN 5330-00-253-2217 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5330-00-253-2217 was assigned to the Federal Catalog?

It was assigned 63 years ago, on Tue, Jan 1, 1963