5310-00-477-0166

Find complete technical information, availability, and procurement data for: 5310-00-477-0166
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5310-00-477-0166 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-00-477-0166

Item Name Code

15935

Assigment Date

06/18/1971 (55 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.940 inches nominal shoulder diameter, 0.670 inches minimum and 0.671 inches maximum hole diameter, 0.010 inches minimum and 0.015 inches maximum shoulder height, 0.030 inches nominal material thickness, 1.565 inches minimum and 1.570 inches maximum outside diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Hole Diameter: 0.670 inches minimum and 0.671 inches maximum
Shoulder Diameter: 0.940 inches nominal
Outside Diameter: 1.565 inches minimum and 1.570 inches maximum
Shoulder Height: 0.010 inches minimum and 0.015 inches maximum
Material Thickness: 0.030 inches nominal
Recess Angle: 90.0 degrees nominal
Surface Finish: 100.0 microinches inner
Surface Finish: 100.0 microinches bottom
Surface Finish: 100.0 microinches counterbore wall
Surface Finish: 100.0 microinches shoulder face
Surface Finish: 100.0 microinches outer
Surface Finish: 40.0 microinches top
Material: steel overall
Style Designator: shouldered and recessed

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
151888-1	Shouldered and Recessed Washer

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-00-477-0166?

The FSCG of the NSN 5310-00-477-0166 is 5310

Does the NSN 5310-00-477-0166 have a Schedule B code assigned?

Yes, the Schedule B code is 7616108000

Does NSN 5310-00-477-0166 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-00-477-0166 contain precious materials?

Precious metal content is unknown

Does NSN 5310-00-477-0166 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-00-477-0166 was assigned to the Federal Catalog?

It was assigned 55 years ago, on Fri, Jun 18, 1971