5315-00-914-4792

Find complete technical information, availability, and procurement data for: 5315-00-914-4792
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5315-00-914-4792 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5315 Pins, Machine Keys and Nails

National Stock Number

5315-00-914-4792

Item Name Code

02386

Assigment Date

01/01/1960 (66 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.750 inches nominal overall length, chamfered first end style, 0.3105 inches minimum and 0.3125 inches maximum diameter, 0.281 inches nominal effective length, 0.281 inches nominal undercut diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

First End Style: chamfered
Overall Length: 0.750 inches nominal
Diameter: 0.3105 inches minimum and 0.3125 inches maximum
Effective Length: 0.281 inches nominal
Undercut Diameter: 0.281 inches nominal
Undercut Width: 0.188 inches nominal
First End Taper Length: 0.031 inches nominal
Second End Relationship With First End: identical
First End Location: both ends
First End Taper Angle: 40.0 degrees minimum and 50.0 degrees maximum
Material: steel comp 303 overall
Material Document And Classification: qq-s-764,cond a fed spec single material response overall
Surface Treatment: chromium overall
Surface Treatment Document And Classification: mil-f-14072 mil spec single treatment response overall
Style Designator: groove

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
515-1620-001	Headless Grooved Pin

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5315-00-914-4792?

The FSCG of the NSN 5315-00-914-4792 is 5315

Does the NSN 5315-00-914-4792 have a Schedule B code assigned?

Yes, the Schedule B code is 7318230000

Does NSN 5315-00-914-4792 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5315-00-914-4792 contain precious materials?

Precious metal content is unknown

Does NSN 5315-00-914-4792 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5315-00-914-4792 was assigned to the Federal Catalog?

It was assigned 66 years ago, on Fri, Jan 1, 1960