5999-01-449-1009

Find complete technical information, availability, and procurement data for: 5999-01-449-1009
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5999-01-449-1009 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Electrical and Electronic Equipment Components

Federal Supply Classification

5999 Miscellaneous Electrical and Electronic Components

National Stock Number

5999-01-449-1009

Item Name Code

16186

Assigment Date

09/19/1997 (28 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1.711 inches minimum and 1.715 inches maximum width, 0.125 inches nominal hole diameter, 1.711 inches minimum and 1.715 inches maximum length, unable to decode body material, 5 bolt hole quantity

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Body Material: unable to decode
Hole Diameter: 0.125 inches nominal
Width: 1.711 inches minimum and 1.715 inches maximum
Length: 1.711 inches minimum and 1.715 inches maximum
Bolt Hole Quantity: 5
Mounting Method: hole
Hole Spacing: five 0.125 in. dia holes
Chain: not included
Insert: not included
Height: 0.205 inches nominal
Material: aluminum alloy 6061
Material Document And Classification: qq-a-250/11, alloy 6061 fed spec single material response

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
C5072698	Electrical Cap

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5999-01-449-1009?

The FSCG of the NSN 5999-01-449-1009 is 5999

Does the NSN 5999-01-449-1009 have a Schedule B code assigned?

Yes, the Schedule B code is 8543909000

Does NSN 5999-01-449-1009 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5999-01-449-1009 contain precious materials?

Item does not contain precious metal.

Does NSN 5999-01-449-1009 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5999-01-449-1009 was assigned to the Federal Catalog?

It was assigned 28 years ago, on Fri, Sep 19, 1997