5340-01-705-8156

Find complete technical information, availability, and procurement data for: 5340-01-705-8156
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-01-705-8156 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-705-8156

Item Name Code

37415

Assigment Date

10/14/2022 (3 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.565 inches minimum and 0.585 inches maximum overall width, 2 mounting hole quantity, 2.488 inches minimum and 2.508 inches maximum overall length, 0.205 inches minimum and 0.211 inches maximum mounting hole diameter, 0.278 inches minimum and 0.298 inches maximum distance from center of mounting hole to edge along the width

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Overall Length: 2.488 inches minimum and 2.508 inches maximum
Overall Width: 0.565 inches minimum and 0.585 inches maximum
Mounting Hole Diameter: 0.205 inches minimum and 0.211 inches maximum
Mounting Hole Quantity: 2
Distance From Center Of Mounting Hole To Edge Along The Width: 0.278 inches minimum and 0.298 inches maximum
End Item Identification: special, air vehicle, aircraft
Center To Center Distance Between First And Second Mounting Holes: 2.052 inches minimum and 2.072 inches maximum
Mounting Facility: unthreaded hole
Block Height: 0.620 inches minimum and 0.640 inches maximum
Clamping Hole Quantity: 2
Distance From End To First Mounting Hole Center: 0.208 inches minimum and 0.228 inches maximum
Distance From End To First Clamping Hole Center: 0.739 inches minimum and 0.759 inches maximum
Center To Center Distance Between First And Second Clamping Holes: 1.240 inches minimum and 1.260 inches maximum
Material: plastic
Material Document And Classification: astm d4086, pa12630 assn std single material response
Style Designator: rectangular

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
NGC500EG-5B10	Block Clamp

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-705-8156?

The FSCG of the NSN 5340-01-705-8156 is 5340

Does NSN 5340-01-705-8156 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-705-8156 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-705-8156 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-705-8156 was assigned to the Federal Catalog?

It was assigned 3 years ago, on Fri, Oct 14, 2022