AS21919WCH13

View detailed technical data, stock status, and sourcing information for: AS21919WCH13
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part AS21919WCH13 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-614-1880

Item Name Code

17532

Assigment Date

11/28/2012 (13 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

c-5m aircraft end item identification, heat and ozone resistant cushioning environmental protection, 0.500 inches nominal overall width, 400.0 fahrenheit temp rating, 0.022 inches minimum and 0.042 inches maximum material thickness

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Cushioning Environmental Protection: heat and ozone resistant
Temp Rating: 400.0 fahrenheit
Overall Width: 0.500 inches nominal
Material Thickness: 0.022 inches minimum and 0.042 inches maximum
End Item Identification: c-5m aircraft
Center To Center Distance Between Loop And Mounting Hole: 0.843 inches minimum and 0.873 inches maximum
Distance From Loop Center To Tongue End: 1.062 inches minimum and 1.092 inches maximum
Loop Inside Diameter: 0.798 inches minimum and 0.828 inches maximum
Part Name Assigned By Controlling Agency: clamp, loop type, cushioned support
Special Features: wedge type cushion
Material: silicon cushion
Material: steel comp 321 band
Surface Treatment: passivate band
Style Designator: single loop
Supplementary Features: for elevated temperature usage inareas exposed to phosphate ester basedfluids and other synthetic fluids. unaffected by ozone. not resistant to petroleum based fluids. color shall be natural white.

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
AS21919WCH13	Loop Clamp

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-614-1880?

The FSCG of the NSN 5340-01-614-1880 is 5340

Does NSN 5340-01-614-1880 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-614-1880 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-614-1880 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-614-1880 was assigned to the Federal Catalog?

It was assigned 13 years ago, on Wed, Nov 28, 2012