Average Power Rating Per Channel 5 milliwatts output Signal Voltage Rating Per Channel 1 volt output

Reads distance to fault directly in feet, 0 to 100 and 0 to 300 scale range, 0 to 100000 feet distance range

Center Hole Diameter 0.911-1.931 Peripheral Diameter 0.838-0.868 hardness rating 60-70 durometer

length 0.664 steel material body outside diameter 0.45 body inside diameter 0.266

plastic material inner groove depth 0.022-0.037" inner groove width 0.09-0.105"

steel material, oustide diameter: 0.49-0.51", aperture diameter: 0.255-0.275, laminated

1 in. w, 54.9 in. min, 55.1 in. max lg o/a

Steel 5.25 in. lg 2.5 in. w 0.75 in. h

2.325 in. lg 0.049 in. dia 100 in. w

Aluminum 2 in. diameter 1.375 in. lg 3/8-16 tapped hole size 80 to 365 adjustable end pressure lbs

Main Tuni Dial Assy

16179 both ends single conductor Dual internal angle connector

Ac Voltage Rating 115-230 volts single phase Operating Electrical Power Source

cable

rubber material center hole diameter 0.346-0.356" sectional height cross 0.069-0.075"

thread length 1.062" head diameter 0.75" head height 0.312" thread diameter 0.19"

Steel 11 in. lg 3.82 in. w 1.17 in. h

Plastic, 0.42 in. lg, 0.35 in. dia

Anodized finish 0.438 in. od, 0.35 in. lg 0.266 in. id with 0.15 in. min 0.156 in. max diameter hole 0.25 in. deep, 0.15 in. min 0.156 in. max dia hole thru od 3/8-32 nef-3a thd on small end used on actuator assy part no. 12c1450-811 f-111 acft

Item consists of fork end part number a-mbeu-36439, stud part no.a-mbeu-1766h5, 0.093 inch diameter indent pin part number ds9-a10, 0.062 inch diameter rivet part no. as155-206, used on seat assembly part number mbeu36726, seat installation pilot ejection

rubber material sectional height cross 0.069-0.075" center hole diameter 0.409-0.419"

quantity 3 test set and repair shop equipment

Body of cast aluminum ams 4217 doubler and van coating of 0.062 in. thickness rubber synthetic ams 3302

width 1" length 35.5-36.5" both with attachments

thread size 0.312" Color yellow iridescent flange thickness 0.16"

Steel 5.25 in. lg 2.38 in. w 2.68 in. h

Consists of connector tube part no. a8720 and adapter tube part no. a8722 used on leg assy front part no. a8597-20 hh-1h aircraft

Consists of connector tube part number: a8720 and adapter tube part number: a8722 used on leg assembly front part number. a8597-10 hh-1h aircraft