NSN 7025-01-535-7854

7025015357854

NO

45109

N/A

Base

Sb-65034-10 (1sbh3) , 19inch ruggedized cabinet

7.75 inches

5.00 inches

1.50 inches

Additional physical features: housed in blak casing (5 in x 7.75 in x 1.5 in); name appears on underside of unit; one red led and one green led on the front panel indicate status of the set during normal operation, and the result of the self-tests when intially powered. Rear panel description: phone connector accepts one end of the d8w phone line cord to connect a two-wire voice terminal to the module; line power connector accepts of one end of the d8w telephone cord that connects between the 8400b plus data module and either a pbx wall jack already powered by a closet supply, ora power supply, which is connected to the pbx wall jack; eia connector interface provides an interface between the 8400b plus data module and the terminal device. If the communications port on the terminal device is a 9-pin interface, use a cord with db9 male connectors on each end to connect the data module to the terminal device.

External

Digital

Digital

8400b plus data module

Features include: nonvolitile, read-write memory for storing installation options, two data options profiles, and up to four telephone numbers; an at command interface that emulates a hayes 24 smartmodem (tm) and supports storage of the wait time for carrier detect interval (s-register s7) and voice call origenation using the atdp command; automatic speed and parity adjustment; even, odd, mark, space or no parity; automatic data throughput adjustment; power-up self test; local and remote loopback tests with test duration timers; voice terminal powered by the pbx in not affected in ac power is removed from the 8400b plus data module; full-duplex asynchronous data module; data service link between data terminal equiptment device, two-wire telephone; and a lucent technologies definity commandes system g3v2 or later.