4810-01-548-1668

An item specifically designed to be used in the transfer of electrical energy to or from another conducting surface. Either the brush or the surface is continually moving during the transfer of energy. The brush is usually composed in part of some form of the element carbon. Includes: (1) a single brush either with or without an attached shunt (flexible wire lead) and/or a helical or flat type pressure spring; (2) a split brush composed of two or more pieces (wafers), which are used in place of one brush usually connected together by individual shunts to a common terminal; (3) paired brushes composed of two identical or non-identical brushes connected together by a common shunt either with or without pressure springs or connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like either with or without individual shunts; (4) multiple brushes composed of more than two identical or non-identical brushes without pressure springs connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like by individual shunts. Does not include moving contacts which make and slide past stationary contacts, but are stationary while the circuit is conducting, such as the sliding contacts on a rheostat or the stationary contact on a synchro. Excludes: contact, electrical; and contact assembly, electrical.

engine,16v pa6 b stc end item identification, ball flow control device, test valve part name assigned by controlling agency, 20.0 celsius minimum and 120.0 celsius maximum temp rating, also called: test valve, danfoss mbv5000- 1311. the pressure test valve has the following: separate inputs and separate test functions, 3 outputs, 1 g 1/4 pressure connection, and pressure gauge connection m16 x 2. overload pressure: 180 bar. burst pressure: 250 bar. operating pressure: 0 to 120 bar. operating temperature: neg 20 to pos 120 degrees celsius. ambient temperature: neg 20 to pos 120 degrees celsius. temperaure of medium: neg 20 to pos 120 degrees celsius. material: housing anodized aimgsi1, nipple aimgsi1, ball 1.4571, gasket peek/fpm. pressure connection: input g 1/4, output flange/m5 x 8. special features