5805-01-581-9251

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.

provides the baseband equpment to interface to satellite connections (tsc-85/93, fdma, tdma). it contains both niprnet and siprnet data enclaves and external interfaces provides interfaces to coalltion forces, dsn, centrixs, jwics, bvtc (via bits), joint and other external newtworks. operating power requirements: lms shelter; 8550 watts, 240 vac, 60 amps; depth: 103.50 in; weight: 3215 lbs. jnn-inc 1a special features, 88.500 inches nominal unpackaged unit width, an/ttc-56a(v)3 end item identification, 68.250 inches nominal unpackaged unit height