5930-01-599-7443

Find complete technical information, availability, and procurement data for: 5930-01-599-7443
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5930-01-599-7443 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Electrical and Electronic Equipment Components

Federal Supply Classification

5930 Switches

National Stock Number

5930-01-599-7443

Item Name Code

00405

Assigment Date

10/19/2011 (14 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

housing material is cast alloy; body is yellow and and the reset button is blue; eyenut material is stainless steel; cable lenght up to 30m; conduit entry 1/2 npt adpater; contacts (safety and auxilary) 2 normally closed and 2normally open special features, emergency stop device part name assigned by controlling agency, 40.0 millimeters nominal body width, 204.0 millimeters nominal body length

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Body Length: 204.0 millimeters nominal
Body Width: 40.0 millimeters nominal
Part Name Assigned By Controlling Agency: emergency stop device
Special Features: housing material is cast alloy; body is yellow and and the reset button is blue; eyenut material is stainless steel; cable lenght up to 30m; conduit entry 1/2 npt adpater; contacts (safety and auxilary) 2 normally closed and 2normally open

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
440E-D13120	Pull Switch

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5930-01-599-7443?

The FSCG of the NSN 5930-01-599-7443 is 5930

Does the NSN 5930-01-599-7443 have a Schedule B code assigned?

Yes, the Schedule B code is 8536509065

Does NSN 5930-01-599-7443 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5930-01-599-7443 contain precious materials?

Item does not contain precious metal.

Does NSN 5930-01-599-7443 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5930-01-599-7443 was assigned to the Federal Catalog?

It was assigned 14 years ago, on Wed, Oct 19, 2011