5305-01-615-5350
Find complete technical information, availability, and procurement data for: 5305-01-615-5350
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5305-01-615-5350 to receive an up to date pricing and availability quote by email.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.
0.600 inches minimum and 0.625 inches maximum thread length, 0.625 inches nominal fastener length, hexagon head style, 2a thread class, right-hand thread direction
Product Characteristics
Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.
- Thread Class
- 2a
- Thread Direction
- right-hand
- Thread Length
- 0.600 inches minimum and 0.625 inches maximum
- Fastener Length
- 0.625 inches nominal
- Head Style
- hexagon
- Head Height
- 0.150 inches minimum and 0.163 inches maximum
- Width Between Flats
- 0.428 inches minimum and 0.438 inches maximum
- End Item Identification
- 2320-01-531-2701
- Nominal Thread Diameter
- 0.250 inches
- Thread Quantity Per Inch
- 20
- Minimum Tensile Strength
- 150000 pounds per square inch
- Chamfer Angle
- 15.0 degrees minimum and 30.0 degrees maximum
- Part Name Assigned By Controlling Agency
- hex cap screw;1/4-20 x 5/8 yellow zinc finish sae j429 grade 8 hex cap screw
- Material
- steel overall
- Material Document And Classification
- gr.8 steel iaw sae j429 national std/spec single material response overall
- Surface Treatment
- zinc overall
- Surface Treatment Document And Classification
- ze/fn 5c per astm f1941 assn std single treatment response overall
- Thread Series Designator
- unc
Related Parts
This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:
| Part Number | Name |
|---|---|
| 0137770 | Hexagon Head Cap Screw |
FAQs
Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.
What is the FSCG of the NSN 5305-01-615-5350?
Does the NSN 5305-01-615-5350 have a Schedule B code assigned?
Does NSN 5305-01-615-5350 require demilitarization?
Does NSN 5305-01-615-5350 contain precious materials?
Does NSN 5305-01-615-5350 contain hazardous materials?
When the NSN 5305-01-615-5350 was assigned to the Federal Catalog?
Professional Distribution
Certified to meet the strict requirements of defense, aerospace, and hazardous materials distribution.
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- AS9120 Quality Standards
- 100% Quality Inspections
You May Also Like
Browse other in-demand NSN parts sourced by professionals in defense, aerospace, and manufacturing sectors. Each component meets strict standards for quality and performance.
Pricing
Submit your request below and our team will respond quickly with up-to-date pricing, delivery estimates, and stock information:
