5305-01-375-7435

Find complete technical information, availability, and procurement data for: 5305-01-375-7435
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5305-01-375-7435 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5305 Screws

National Stock Number

5305-01-375-7435

Item Name Code

16282

Assigment Date

05/20/1993 (33 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

3a thread class, 0.625 inches nominal fastener length, right-hand thread direction, 0.600 inches minimum and 0.656 inches maximum head diameter, flat countersunk head style

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Thread Class: 3a
Thread Direction: right-hand
Fastener Length: 0.625 inches nominal
Head Style: flat countersunk
Head Diameter: 0.600 inches minimum and 0.656 inches maximum
Internal Drive Style: hexagon
End Item Identification: used on c141 acft
Nominal Thread Diameter: 0.312 inches
Width Across Flats: 0.188 inches nominal
Thread Quantity Per Inch: 24
Minimum Tensile Strength: 168300 pounds per square inch
Hardness Rating: 38.0 rockwell c minimum and 43.0 rockwell c maximum overall
Countersink Angle: 82.0 degrees nominal
Material: steel overall
Surface Treatment: cadmium and chromate overall
Surface Treatment Document And Classification: qq-p-416,tyl1,cl3 fed spec single treatment response overall
Thread Series Designator: unrf

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
16990-5F-10C	Socket Head Cap Screw

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5305-01-375-7435?

The FSCG of the NSN 5305-01-375-7435 is 5305

Does the NSN 5305-01-375-7435 have a Schedule B code assigned?

Yes, the Schedule B code is 7318152000

Does NSN 5305-01-375-7435 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5305-01-375-7435 contain precious materials?

Item does not contain precious metal.

Does NSN 5305-01-375-7435 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5305-01-375-7435 was assigned to the Federal Catalog?

It was assigned 33 years ago, on Thu, May 20, 1993