160D950827-225

View detailed technical data, stock status, and sourcing information for: 160D950827-225
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 160D950827-225 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Nonmetallic Fabricated Materials

Federal Supply Classification

9330 Plastics Fabricated Materials

National Stock Number

9330-01-502-5536

Item Name Code

19975

Assigment Date

11/12/2002 (23 years ago)

Pigment dispersed in a varnish vehicle containing natural or synthetic resin. The varnish may be modified with drying oil to the extent that the total drying oil content of the vehicle, including the oil in the varnish, does not exceed 75 percent, by weight, of the total nonvolatile portion of the vehicle. When applied in a thin layer, it dries principally by polymerization and/or oxidation to form a hard, smooth, opaque film. Excludes:lacquer; enamel, heat resisting; bituminous and ceramic coatings and gold size.

16.800 inches nominal width, 2.500 inches nominal thickness, 17.300 inches nominal length, not fire retarding fire retarding characteristic, aircraft, thunderbolt ii, a-10 end item identification

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Fire Retarding Characteristic: not fire retarding
Width: 16.800 inches nominal
Thickness: 2.500 inches nominal
Length: 17.300 inches nominal
End Item Identification: aircraft, thunderbolt ii, a-10
Surface Condition: rough
Density Rating: 1.2 pounds per cubic foot
Compression Strength At 25 Pct Deflection: 0.35 pounds per square inch minimum
Part Name Assigned By Controlling Agency: filler foam
Special Features: "rectangular with 2 cutouts on top/short edge: 2.80wx4.00h in right corner & 2.60wx3.70h in left corner; a cutout at bottom left corner: 4.14wx5.30h; far side tapers 0.24 at bottom edge & is marked: "up" & "aft" on 2 lines near center top & part number in bottom left corner"
Material: plastic polyurethane
Supplementary Features: material to be reticulated foam per sm-alc specification ms-mmrs-87-100

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
160D950827-225	Cellular Plastic Material

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 9330-01-502-5536?

The FSCG of the NSN 9330-01-502-5536 is 9330

Does the NSN 9330-01-502-5536 have a Schedule B code assigned?

Yes, the Schedule B code is 3921190000

Does NSN 9330-01-502-5536 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 9330-01-502-5536 contain precious materials?

Item does not contain precious metal.

Does NSN 9330-01-502-5536 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 9330-01-502-5536 was assigned to the Federal Catalog?

It was assigned 23 years ago, on Tue, Nov 12, 2002