160D950827-537

View detailed technical data, stock status, and sourcing information for: 160D950827-537
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 160D950827-537 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Nonmetallic Fabricated Materials

Federal Supply Classification

9330 Plastics Fabricated Materials

National Stock Number

9330-01-502-1061

Item Name Code

19975

Assigment Date

10/25/2002 (23 years ago)

A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes:valve, stop-check; cock, shutoff, screw stem; and valve, solenoid.

aircraft, thunderbolt ii, a-10 end item identification, 22.320 inches nominal length, 2.500 inches nominal thickness, not fire retarding fire retarding characteristic, 16.260 inches nominal width

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Fire Retarding Characteristic: not fire retarding
Width: 16.260 inches nominal
Thickness: 2.500 inches nominal
Length: 22.320 inches nominal
End Item Identification: aircraft, thunderbolt ii, a-10
Surface Condition: rough
Density Rating: 1.2 pounds per cubic foot
Compression Strength At 25 Pct Deflection: 0.35 pounds per square inch minimum
Part Name Assigned By Controlling Agency: filler foam
Special Features: "rectangular with 5 cutouts on right/short edge: 1.00wx1.00h, 2.10 & 5.00& 9.60 & 13.70 inches from bottom edge; a cutout on bottom edge: 7.32wx1.16h, 2.96 from left edge; 2 cutouts on left edge: 1.25wx1.00h, 2.84 & 13.00 from bottom; and a rectangular cutout near center: 3.00wx2.00h, 9.00 from bottom and 4.36 from right edge with line cut thru from top edge of cutout to top of item, 5.36 from right edge; near side has crosswise grooves: 1.25wx0.50d along left edge and 2.00wx1.50d along right edge and has markings: part number near upper left corner and "up" and "fwd" on w lines to right of part number; far side has semicircular lengthwise cutout with radius 1.00 centered 9.90 inches from bottom edge"
Material: plastic polyurethane
Supplementary Features: material to be reticulated foam per sm-alc specification ms-mmrs-87-100

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
160D950827-537	Cellular Plastic Material

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 9330-01-502-1061?

The FSCG of the NSN 9330-01-502-1061 is 9330

Does the NSN 9330-01-502-1061 have a Schedule B code assigned?

Yes, the Schedule B code is 3921190000

Does NSN 9330-01-502-1061 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 9330-01-502-1061 contain precious materials?

Item does not contain precious metal.

Does NSN 9330-01-502-1061 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 9330-01-502-1061 was assigned to the Federal Catalog?

It was assigned 23 years ago, on Fri, Oct 25, 2002