INDX-MX125-2

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.

indx-mx125-2 4x15.7in 10x40cm part name assigned by controlling agency, thickess; emulsion 25 microns, 12.5 each side. overcoat 10 microns, 5 each side. total 0.22 mm. lead screens 1.5 microns protective overcoat. 27.5 microns lead, 70 microns paper. cut tosize. use with led safelight (660nm red) or a red safelight filter. unexposed storage 50 to 70 degree f. exposed in cool dry place. processes 60 to 80 degree f special features, 0.180 millimeters nominal base material thickness