8451A47

View detailed technical data, stock status, and sourcing information for: 8451A47
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 8451A47 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5330 Packing and Gasket Materials

National Stock Number

5330-01-568-4531

Item Name Code

32847

Assigment Date

10/30/2008 (17 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.4375 inches nominal groove length, special cross-sectional shape style, 0.0937 inches minimum and 0.1875 inches maximum groove width, 0.5156 inches nominal cross-sectional width, 0.3906 inches nominal cross-sectional height

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Cross-Sectional Shape Style: special
Groove Length: 0.4375 inches nominal
Groove Width: 0.0937 inches minimum and 0.1875 inches maximum
Cross-Sectional Height: 0.3906 inches nominal
Cross-Sectional Width: 0.5156 inches nominal
End Item Identification: 2350-01-538-8373; mrap - m-atv with cs13 pop and sne
Construction: one-piece
Hardness Rating: 65.0 rockwell a minimum and 90.0 rockwell a maximum external
Part Name Assigned By Controlling Agency: self gripping vinyl edge trim with metal core
Special Features: core material: metal (adds strength and stability); temperature range: -20f to +150f; plastic-style 3 (textured)
Color: black
Material: plastic external

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
8451A47	Nonmetallic Special Shaped Seal

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5330-01-568-4531?

The FSCG of the NSN 5330-01-568-4531 is 5330

Does the NSN 5330-01-568-4531 have a Schedule B code assigned?

Yes, the Schedule B code is 3926904500

Does NSN 5330-01-568-4531 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5330-01-568-4531 contain precious materials?

Item does not contain precious metal.

Does NSN 5330-01-568-4531 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5330-01-568-4531 was assigned to the Federal Catalog?

It was assigned 17 years ago, on Thu, Oct 30, 2008