22080-1

View detailed technical data, stock status, and sourcing information for: 22080-1
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 22080-1 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5330 Packing and Gasket Materials

National Stock Number

5330-01-532-0243

Item Name Code

04521

Assigment Date

07/26/2005 (21 years ago)

Two or more insulated conductors (solid or stranded) contained in a common covering, or two or more insulated conductors twisted or molded together without a common covering, or one insulated conductor with a metallic covering, covering, shield, or outer conductor. The rated working voltage of the item must be 300 volts or more, or in lieu of this the test voltage must be 1,000 volts or more; and the size of each individual conductor must be number 18 american wire gage (0.75 square millimeters) or larger. For cables with uninsulated neutral conductor use the hightest rated voltage. Refers to bulk quantities only, for items of definite length with processed ends or terminated in fittings, see cable assembly, power, electrical. For low voltage aircraft and automotive cable, see cable, special purpose, electrical.

0.277 inches minimum and 0.280 inches maximum cross section outside diameter, 0.175 inches minimum and 0.185 inches maximum cross-sectional height, 0.204 inches minimum and 0.290 inches maximum body recess diameter, 0.195 inches minimum and 0.200 inches maximum recess diameter, 0.150 inches minimum and 0.152 inches maximum center hole diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Recess Diameter: 0.195 inches minimum and 0.200 inches maximum
Cross Section Outside Diameter: 0.277 inches minimum and 0.280 inches maximum
Cross-Sectional Height: 0.175 inches minimum and 0.185 inches maximum
Body Recess Diameter: 0.204 inches minimum and 0.290 inches maximum
Center Hole Diameter: 0.150 inches minimum and 0.152 inches maximum
End Item Identification: f-15 aircraft
Angle: 45.0 degrees nominal
Part Name Assigned By Controlling Agency: seal, ferrule
Material: rubber silicone class q overall
Material Document And Classification: zz-r-765, class 2b, durometer 50-55 mil spec single material response overall

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
22080-1	Preformed Packing

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5330-01-532-0243?

The FSCG of the NSN 5330-01-532-0243 is 5330

Does the NSN 5330-01-532-0243 have a Schedule B code assigned?

Yes, the Schedule B code is 3926904500

Does NSN 5330-01-532-0243 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5330-01-532-0243 contain precious materials?

Item does not contain precious metal.

Does NSN 5330-01-532-0243 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5330-01-532-0243 was assigned to the Federal Catalog?

It was assigned 21 years ago, on Tue, Jul 26, 2005