758A813P1

View detailed technical data, stock status, and sourcing information for: 758A813P1
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 758A813P1 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5330 Packing and Gasket Materials

National Stock Number

5330-01-450-8753

Item Name Code

04522

Assigment Date

11/25/1997 (28 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1.500 inches nominal bolt circle diameter, solid single or composition cross-sectional shape style, 1.120 inches minimum and 1.150 inches maximum aperture diameter, 1.685 inches nominal overall width, 0.200 inches minimum and 0.220 inches maximum hole diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Cross-Sectional Shape Style: solid single or composition
Hole Diameter: 0.200 inches minimum and 0.220 inches maximum
Bolt Circle Diameter: 1.500 inches nominal
Overall Width: 1.685 inches nominal
Aperture Diameter: 1.120 inches minimum and 1.150 inches maximum
Outside Corner Radius: 0.170 inches minimum and 0.200 inches maximum
Side Radius From Gasket Center: 0.725 inches nominal
Cross-Sectional Thickness: 0.032 inches nominal
Bolt Hole Quantity: 3
Environmental Attribute Code: asbestos alternative products
Special Features: contains non-asbestos material
Material Document And Classification: a50tf268, cagec 99207 mfr ref single material response overall
Style Designator: non-circular

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
758A813P001 NON-ASBESTOS	Gasket
758A813P1	Gasket

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5330-01-450-8753?

The FSCG of the NSN 5330-01-450-8753 is 5330

Does NSN 5330-01-450-8753 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5330-01-450-8753 contain precious materials?

Item does not contain precious metal.

Does NSN 5330-01-450-8753 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5330-01-450-8753 was assigned to the Federal Catalog?

It was assigned 28 years ago, on Tue, Nov 25, 1997