306-032-0010

View detailed technical data, stock status, and sourcing information for: 306-032-0010
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 306-032-0010 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5330 Packing and Gasket Materials

National Stock Number

5330-00-928-4588

Item Name Code

05680

Assigment Date

08/31/1966 (59 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.067 inches minimum and 0.077 inches maximum packing ring cross-sectional diameter, one-piece construction, 0.045 inches minimum and 0.055 inches maximum retainer thickness, 0.463 inches minimum and 0.473 inches maximum outside diameter, 0.181 inches minimum and 0.191 inches maximum packing inside diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Outside Diameter: 0.463 inches minimum and 0.473 inches maximum
Retainer Thickness: 0.045 inches minimum and 0.055 inches maximum
Packing Ring Cross-Sectional Diameter: 0.067 inches minimum and 0.077 inches maximum
Packing Inside Diameter: 0.181 inches minimum and 0.191 inches maximum
Construction: one-piece
Material: rubber silicone class q packing
Material: steel comp 302 retainer
Material Document And Classification: ams 3304 assn std single material response packing
Material Document And Classification: sae j405 assn std single material response retainer
Surface Treatment: passivate retainer

Replaces National Stock Numbers

Below is a list of NSNs that have been officially superseded by this NSN:

NSN	Name	Date
5310-00-492-4734	No Name Available	01/21/1973

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
306-032-0010	Packing With Retainer
600-6230-10-0S	Packing With Retainer
600-630-100S	Packing With Retainer
BACS11W3C	Packing With Retainer

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5330-00-928-4588?

The FSCG of the NSN 5330-00-928-4588 is 5330

Does the NSN 5330-00-928-4588 have a Schedule B code assigned?

Yes, the Schedule B code is 3926904500

Does NSN 5330-00-928-4588 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5330-00-928-4588 contain precious materials?

Precious metal content is unknown

Does NSN 5330-00-928-4588 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5330-00-928-4588 was assigned to the Federal Catalog?

It was assigned 59 years ago, on Wed, Aug 31, 1966