5330-00-912-6018

Find complete technical information, availability, and procurement data for: 5330-00-912-6018
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5330-00-912-6018 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5330 Packing and Gasket Materials

National Stock Number

5330-00-912-6018

Item Name Code

04521

Assigment Date

06/29/1966 (60 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

o-ring cross-sectional shape style, 0.639 inches minimum and 0.649 inches maximum center hole diameter, -85.0 fahrenheit temp rating, 55.0 shore durometer a minimum and 75.0 shore durometer a maximum overall hardness rating, 0.084 inches minimum and 0.090 inches maximum cross-sectional height

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Cross-Sectional Shape Style: o-ring
Temp Rating: -85.0 fahrenheit
Cross-Sectional Height: 0.084 inches minimum and 0.090 inches maximum
Center Hole Diameter: 0.639 inches minimum and 0.649 inches maximum
Hardness Rating: 55.0 shore durometer a minimum and 75.0 shore durometer a maximum overall
Material: rubber fluorosilicone class fq overall
Material Document And Classification: mil-r-25988 mil spec single material response overall

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
65A32377-05	Preformed Packing

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5330-00-912-6018?

The FSCG of the NSN 5330-00-912-6018 is 5330

Does the NSN 5330-00-912-6018 have a Schedule B code assigned?

Yes, the Schedule B code is 3926904500

Does NSN 5330-00-912-6018 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5330-00-912-6018 contain precious materials?

Item does not contain precious metal.

Does NSN 5330-00-912-6018 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5330-00-912-6018 was assigned to the Federal Catalog?

It was assigned 60 years ago, on Wed, Jun 29, 1966