5330-00-882-7120

Find complete technical information, availability, and procurement data for: 5330-00-882-7120
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5330-00-882-7120 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5330 Packing and Gasket Materials

National Stock Number

5330-00-882-7120

Item Name Code

04522

Assigment Date

01/01/1962 (64 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

solid single or composition cross-sectional shape style, 3.190 inches nominal overall length, 0.250 inches nominal outside corner radius, 0.410 inches nominal hole diameter, 2.000 inches nominal overall width

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Cross-Sectional Shape Style: solid single or composition
Hole Diameter: 0.410 inches nominal
Overall Length: 3.190 inches nominal
Overall Width: 2.000 inches nominal
Outside Corner Radius: 0.250 inches nominal
Center To Center Distance Between Bolt Holes Along Length: 1.500 inches nominal
Bolt Hole Centerline To Nearest Edge Distance: 1.000 inches nominal
Cross-Sectional Thickness: 0.060 inches nominal
Hardness Rating: 45.0 shore durometer a minimum and 55.0 shore durometer a maximum overall
Material: rubber chloroprene class cr overall
Material Document And Classification: astm d2000 2bc520a1b1e3f2r assn std single material response overall

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
5330008827120	Gasket
8762879	Gasket

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5330-00-882-7120?

The FSCG of the NSN 5330-00-882-7120 is 5330

Does the NSN 5330-00-882-7120 have a Schedule B code assigned?

Yes, the Schedule B code is 8807300060

Does NSN 5330-00-882-7120 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5330-00-882-7120 contain precious materials?

Precious metal content is unknown

Does NSN 5330-00-882-7120 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5330-00-882-7120 was assigned to the Federal Catalog?

It was assigned 64 years ago, on Mon, Jan 1, 1962