2101601

View detailed technical data, stock status, and sourcing information for: 2101601
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 2101601 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5330 Packing and Gasket Materials

National Stock Number

5330-00-291-2967

Item Name Code

04522

Assigment Date

01/01/1963 (63 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.109 inches minimum and 0.141 inches maximum cross-sectional thickness, rubber synthetic overall material, solid single or composition cross-sectional shape style, 2.828 inches minimum and 2.838 inches maximum aperture diameter, 3.115 inches minimum and 3.125 inches maximum outside diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Cross-Sectional Shape Style: solid single or composition
Outside Diameter: 3.115 inches minimum and 3.125 inches maximum
Aperture Diameter: 2.828 inches minimum and 2.838 inches maximum
Cross-Sectional Thickness: 0.109 inches minimum and 0.141 inches maximum
Material: rubber synthetic overall
Material Document And Classification: -94 fscm 81321 mfr ref single material response overall
Style Designator: circular

Replaces National Stock Numbers

Below is a list of NSNs that have been officially superseded by this NSN:

NSN	Name	Date
5330-00-527-7508	No Name Available	05/01/1991

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
2101601	Gasket
77968A	Gasket

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5330-00-291-2967?

The FSCG of the NSN 5330-00-291-2967 is 5330

Does NSN 5330-00-291-2967 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5330-00-291-2967 contain precious materials?

Precious metal content is unknown

Does NSN 5330-00-291-2967 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5330-00-291-2967 was assigned to the Federal Catalog?

It was assigned 63 years ago, on Tue, Jan 1, 1963