387511PC43

View detailed technical data, stock status, and sourcing information for: 387511PC43
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 387511PC43 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5330 Packing and Gasket Materials

National Stock Number

5330-00-256-3429

Item Name Code

04522

Assigment Date

01/01/1963 (63 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

solid single or composition cross-sectional shape style, copper alloy 102 or copper alloy 105 or copper alloy 110 or copper alloy 116 or copper alloy 122 or copper alloy 125 overall material, 1.125 inches nominal outside diameter, 0.032 inches nominal cross-sectional thickness, 0.953 inches nominal aperture diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Cross-Sectional Shape Style: solid single or composition
Outside Diameter: 1.125 inches nominal
Aperture Diameter: 0.953 inches nominal
Cross-Sectional Thickness: 0.032 inches nominal
Material: copper alloy 102 or copper alloy 105 or copper alloy 110 or copper alloy 116 or copper alloy 122 or copper alloy 125 overall
Material Document And Classification: qq-c-576,cr,soft annealed fed spec all material responses overall
Style Designator: circular

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
24X47	Gasket
3435A10PC43	Gasket
3435A3PC43	Gasket
3435A4PC43	Gasket
387511PC43	Gasket
387512PC43	Gasket
387514PC43	Gasket
389914PC43	Gasket
389915PC43	Gasket
389920PC4597	Gasket
39461-1PC43	Gasket
39461-2PC43	Gasket
39461-4PC43	Gasket
533539PC43	Gasket
533540PC43	Gasket
533546PC43	Gasket
564-2200-936202PC43	Gasket
62271-2PC43	Gasket
E38933-10PC4597	Gasket
E38933-4PC43	Gasket
E38933-5PC43	Gasket

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5330-00-256-3429?

The FSCG of the NSN 5330-00-256-3429 is 5330

Does NSN 5330-00-256-3429 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5330-00-256-3429 contain precious materials?

Precious metal content is unknown

Does NSN 5330-00-256-3429 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5330-00-256-3429 was assigned to the Federal Catalog?

It was assigned 63 years ago, on Tue, Jan 1, 1963