J2010PC1091

View detailed technical data, stock status, and sourcing information for: J2010PC1091
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part J2010PC1091 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5330 Packing and Gasket Materials

National Stock Number

5330-00-194-0876

Item Name Code

04522

Assigment Date

01/01/1963 (63 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

copper alloy overall material, 0.531 inches nominal aperture diameter, rectangular metal cross-sectional shape style, 0.031 inches nominal cross-sectional thickness, 0.750 inches nominal outside diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Cross-Sectional Shape Style: rectangular metal
Outside Diameter: 0.750 inches nominal
Aperture Diameter: 0.531 inches nominal
Cross-Sectional Thickness: 0.031 inches nominal
Material: copper alloy overall
Material Document And Classification: qq-c-576 fed spec single material response overall
Style Designator: circular

Replaces National Stock Numbers

Below is a list of NSNs that have been officially superseded by this NSN:

NSN	Name	Date
5330-01-036-8674	No Name Available	08/01/1986

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
1057 PIECE 11	Gasket
446477PC1091	Gasket
446477WPC1091	Gasket
533819PC1091	Gasket
8000-23	Gasket
8031 PIECE 14	Gasket
8035 PIECE 14	Gasket
8500 PIECE 23	Gasket
8502 PIECE23	Gasket
8504 PIECE 13	Gasket
8505 PIECE 13	Gasket
8524 PIECE 14	Gasket
8571 PIECE 13	Gasket
8572 PIECE 13	Gasket
A06486.009.175	Gasket
A6486-009-175	Gasket
A6486.009.175.	Gasket
J2010PC1091	Gasket

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5330-00-194-0876?

The FSCG of the NSN 5330-00-194-0876 is 5330

Does NSN 5330-00-194-0876 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5330-00-194-0876 contain precious materials?

Precious metal content is unknown

Does NSN 5330-00-194-0876 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5330-00-194-0876 was assigned to the Federal Catalog?

It was assigned 63 years ago, on Tue, Jan 1, 1963