510-14031-501

View detailed technical data, stock status, and sourcing information for: 510-14031-501
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 510-14031-501 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-01-362-3706

Item Name Code

01869

Assigment Date

08/05/1992 (33 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1.515 inches nominal hole diameter, 0.665 inches minimum and 0.675 inches maximum distance from centerline to top of internal key, 0.156 inches nominal internal straight key width, 0.125 inches nominal material thickness, 2.250 inches nominal outside diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Hole Diameter: 1.515 inches nominal
Outside Diameter: 2.250 inches nominal
Internal Straight Key Width: 0.156 inches nominal
Distance From Centerline To Top Of Internal Key: 0.665 inches minimum and 0.675 inches maximum
Material Thickness: 0.125 inches nominal
Special Features: from ctr of washer to flat edge 1.010 on one side only
Material: steel comp xm-12 overall
Material Document And Classification: ams5659c assn std single material response overall

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
510-14031-501	Key Washer

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-01-362-3706?

The FSCG of the NSN 5310-01-362-3706 is 5310

Does the NSN 5310-01-362-3706 have a Schedule B code assigned?

Yes, the Schedule B code is 7318220000

Does NSN 5310-01-362-3706 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-01-362-3706 contain precious materials?

Item does not contain precious metal.

Does NSN 5310-01-362-3706 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-01-362-3706 was assigned to the Federal Catalog?

It was assigned 33 years ago, on Wed, Aug 5, 1992