5310-01-176-7022

Find complete technical information, availability, and procurement data for: 5310-01-176-7022
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5310-01-176-7022 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-01-176-7022

Item Name Code

15933

Assigment Date

04/16/1984 (42 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.314 inches minimum and 0.318 inches maximum hole diameter, 0.583 inches minimum and 0.603 inches maximum outside diameter, 0.057 inches minimum and 0.069 inches maximum material thickness, 0.402 inches minimum and 0.412 inches maximum recess diameter, 90.0 degrees nominal recess angle

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Hole Diameter: 0.314 inches minimum and 0.318 inches maximum
Outside Diameter: 0.583 inches minimum and 0.603 inches maximum
Recess Diameter: 0.402 inches minimum and 0.412 inches maximum
Material Thickness: 0.057 inches minimum and 0.069 inches maximum
Recess Angle: 90.0 degrees nominal
Special Features: heat treatment,260,000 ps8 min
Material Document And Classification: ams 5758 assn std single material response or ams 5844 assn std single material response overall
Style Designator: recessed

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
75708C-5	Recessed Washer
AS10485-C5	Recessed Washer
HS4134C5	Recessed Washer

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-01-176-7022?

The FSCG of the NSN 5310-01-176-7022 is 5310

Does NSN 5310-01-176-7022 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-01-176-7022 contain precious materials?

Item does not contain precious metal.

Does NSN 5310-01-176-7022 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-01-176-7022 was assigned to the Federal Catalog?

It was assigned 42 years ago, on Mon, Apr 16, 1984