5310-01-136-3553

Find complete technical information, availability, and procurement data for: 5310-01-136-3553
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5310-01-136-3553 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-01-136-3553

Item Name Code

29735

Assigment Date

08/06/1982 (43 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.125 inches nominal flange thickness, 0.095 inches minimum and 0.105 inches maximum overall thread length, 2b thread class, 0.185 inches minimum and 0.188 inches maximum flange diameter, right-hand thread direction

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Thread Class: 2b
Thread Direction: right-hand
Thread Length: 0.095 inches minimum and 0.105 inches maximum overall
Flange Diameter: 0.185 inches minimum and 0.188 inches maximum
Flange Thickness: 0.125 inches nominal
Nut Style: sleeve
Nut Length: 0.558 inches minimum and 0.562 inches maximum
Cross-Sectional Shape: round nut
Thread Series: unc
Thread Quantity Per Inch: 56
Nominal Thread Size: 0.086 inches
Part Name Assigned By Controlling Agency: navy special project
Special Features: a slot on top of head 0.028 in. min and 0.034 in. max wide by 0.028 in. min and 0.034 in. max deep
Surface Treatment: passivate overall
Surface Treatment Document And Classification: qq-p-35 fed spec single treatment response overall

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-01-136-3553?

The FSCG of the NSN 5310-01-136-3553 is 5310

Does NSN 5310-01-136-3553 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-01-136-3553 contain precious materials?

Item does not contain precious metal.

Does NSN 5310-01-136-3553 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-01-136-3553 was assigned to the Federal Catalog?

It was assigned 43 years ago, on Fri, Aug 6, 1982