64356-04051-107
View detailed technical data, stock status, and sourcing information for: 64356-04051-107
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 64356-04051-107 to receive an up to date pricing and availability quote by email.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.
left-hand thread direction, 0.086 inches minimum and 0.091 inches maximum drive point depth, round nut style, 2.475 inches minimum and 2.480 inches maximum small end diameter, +2.1209 to 2.1260 inches thread pitch diameters
Product Characteristics
Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.
- Thread Pitch Diameters
- +2.1209 to 2.1260 inches
- Thread Direction
- left-hand
- Small End Diameter
- 2.475 inches minimum and 2.480 inches maximum
- Drive Point Depth
- 0.086 inches minimum and 0.091 inches maximum
- Nut Style
- round
- Nut Diameter
- 2.562 inches minimum and 2.572 inches maximum
- Nut Thickness
- 0.307 inches minimum and 0.317 inches maximum
- Drive Point Width
- 0.250 inches minimum and 0.260 inches maximum
- Undercut Thickness
- 0.095 inches minimum and 0.105 inches maximum
- Drive Point Quantity
- 8
- Thread Series
- uns
- Thread Quantity Per Inch
- 18
- Hardness Rating
- 26.0 rockwell c minimum and 33.0 rockwell c maximum
- Nominal Thread Size
- 2.157 inches
- Countersink Angle
- 90.0 degrees nominal nut
- Material
- steel comp 4130 overall
- Material Document And Classification
- mil-s-6758 mil spec single material response overall
- Surface Treatment
- oxide overall
- Surface Treatment Document And Classification
- mil-c-13924,cl 1 mil spec single treatment response overall
Related Parts
This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:
| Part Number | Name |
|---|---|
| 64356-04051-107 | Round Plain Nut |
FAQs
Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.
What is the FSCG of the NSN 5310-01-123-8490?
Does the NSN 5310-01-123-8490 have a Schedule B code assigned?
Does NSN 5310-01-123-8490 require demilitarization?
Does NSN 5310-01-123-8490 contain precious materials?
Does NSN 5310-01-123-8490 contain hazardous materials?
When the NSN 5310-01-123-8490 was assigned to the Federal Catalog?
Professional Distribution
Certified to meet the strict requirements of defense, aerospace, and hazardous materials distribution.
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- AS9120 Quality Standards
- 100% Quality Inspections
You May Also Like
Browse other in-demand NSN parts sourced by professionals in defense, aerospace, and manufacturing sectors. Each component meets strict standards for quality and performance.
Pricing
Submit your request below and our team will respond quickly with up-to-date pricing, delivery estimates, and stock information:
