5310-01-094-5097

Find complete technical information, availability, and procurement data for: 5310-01-094-5097
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5310-01-094-5097 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-01-094-5097

Item Name Code

13393

Assigment Date

05/10/1980 (46 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.002 inches minimum and 0.022 inches maximum thickness, round center hole shape style, 0.880 inches minimum and 0.900 inches maximum hole diameter, round peripheral shape style, rectangular cross-sectional shape style

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Cross-Sectional Shape Style: rectangular
Hole Diameter: 0.880 inches minimum and 0.900 inches maximum
Peripheral Shape Style: round
Center Hole Shape Style: round
Thickness: 0.002 inches minimum and 0.022 inches maximum
Overall Diameter: 1.255 inches minimum and 1.275 inches maximum
Material: steel comp 301 or steel comp 302 or steel comp 304 or steel comp 316 overall
Material Document And Classification: mil-s-5059 mil spec single material response overall
Surface Treatment: passivate overall
Surface Treatment Document And Classification: qq-p-35 fed spec single treatment response overall

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
G440050-27	Flat Washer

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-01-094-5097?

The FSCG of the NSN 5310-01-094-5097 is 5310

Does the NSN 5310-01-094-5097 have a Schedule B code assigned?

Yes, the Schedule B code is 7318220000

Does NSN 5310-01-094-5097 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-01-094-5097 contain precious materials?

Precious metal content is unknown

Does NSN 5310-01-094-5097 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-01-094-5097 was assigned to the Federal Catalog?

It was assigned 46 years ago, on Sat, May 10, 1980