5310-01-077-1023

Find complete technical information, availability, and procurement data for: 5310-01-077-1023
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5310-01-077-1023 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-01-077-1023

Item Name Code

13393

Assigment Date

05/18/1979 (47 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

rectangular cross-sectional shape style, round peripheral shape style, 0.051 inches minimum and 0.080 inches maximum thickness, 0.339 inches minimum and 0.359 inches maximum hole diameter, round center hole shape style

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Cross-Sectional Shape Style: rectangular
Hole Diameter: 0.339 inches minimum and 0.359 inches maximum
Peripheral Shape Style: round
Center Hole Shape Style: round
Thickness: 0.051 inches minimum and 0.080 inches maximum
Overall Diameter: 0.681 inches minimum and 0.703 inches maximum
Criticality Code Justification: zzzw
Material: copper alloy 11 overall
Material Document And Classification: qq-b-613,temper 1/2 hard fed spec single material response overall
Special Test Features: special quality control testing
Test Data Document: "81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
Nondefinitive Spec/Std Data: a type and 1 grade and e class
Departure From Cited Document: as differentiated by material which must conform to ships parts control center special quality control provisions

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-01-077-1023?

The FSCG of the NSN 5310-01-077-1023 is 5310

Does the NSN 5310-01-077-1023 have a Schedule B code assigned?

Yes, the Schedule B code is 7415210000

Does NSN 5310-01-077-1023 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-01-077-1023 contain precious materials?

Precious metal content is unknown

Does NSN 5310-01-077-1023 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-01-077-1023 was assigned to the Federal Catalog?

It was assigned 47 years ago, on Fri, May 18, 1979