5310-01-005-3196

Find complete technical information, availability, and procurement data for: 5310-01-005-3196
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5310-01-005-3196 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-01-005-3196

Item Name Code

15887

Assigment Date

06/23/1975 (51 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1.125 inches nominal nut diameter, +0.6437 to 0.6440 inches thread pitch diameters, round nut style, right-hand thread direction, 0.438 inches nominal nut thickness

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Thread Pitch Diameters: +0.6437 to 0.6440 inches
Thread Direction: right-hand
Nut Style: round
Nut Diameter: 1.125 inches nominal
Nut Thickness: 0.438 inches nominal
Drive Point Quantity: 4
Drive Point Diameter: 0.089 inches nominal
Hole Type And Quantity: 4 tapped
Thread Series: uns
Thread Quantity Per Inch: 32
Nominal Thread Size: 0.664 inches
Hole Thread Quantity Per Inch: 40
Hole Configuration Style: configuration j
Hole Nominal Thread Diameter: 0.112 inches
Material: steel comp 4340 overall
Material Document And Classification: sae assn std single material response overall
Surface Treatment: oxide overall
Surface Treatment Document And Classification: p.s.42,fscm 99551 mfr ref single treatment response overall

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
X61-3903	Round Plain Nut

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-01-005-3196?

The FSCG of the NSN 5310-01-005-3196 is 5310

Does the NSN 5310-01-005-3196 have a Schedule B code assigned?

Yes, the Schedule B code is 7318160000

Does NSN 5310-01-005-3196 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-01-005-3196 contain precious materials?

Precious metal content is unknown

Does NSN 5310-01-005-3196 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-01-005-3196 was assigned to the Federal Catalog?

It was assigned 51 years ago, on Mon, Jun 23, 1975