5310-00-916-4579

Find complete technical information, availability, and procurement data for: 5310-00-916-4579
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5310-00-916-4579 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-00-916-4579

Item Name Code

17667

Assigment Date

07/15/1966 (60 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

plate nut spacer nut style, 0.134 inches minimum and 0.140 inches maximum mounting hole diameter, 1.281 inches nominal nut length, 0.385 inches minimum and 0.395 inches maximum thru-hole diameter, 0.032 inches nominal plate thickness

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Mounting Hole Diameter: 0.134 inches minimum and 0.140 inches maximum
Nut Style: plate nut spacer
Nut Length: 1.281 inches nominal
Thru-Hole Diameter: 0.385 inches minimum and 0.395 inches maximum
Plate Thickness: 0.032 inches nominal
Plate Width: 0.594 inches nominal
Nut Mounting Provision: straight holes
Mounting Hole Arrangement Style: 2 holes
Distance From Aperture Center To Mounting Hole Center: 0.497 inches minimum and 0.503 inches maximum
Center To Center Distance Between Mounting Holes Along Length: 0.998 inches minimum and 1.002 inches maximum
Material: aluminum alloy 5052 overall
Material Document And Classification: qq-a-250/8 fed spec single material response overall
Surface Treatment: anodize overall

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
NAS463XD516M	Plate Nut Spacer

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-00-916-4579?

The FSCG of the NSN 5310-00-916-4579 is 5310

Does NSN 5310-00-916-4579 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-00-916-4579 contain precious materials?

Precious metal content is unknown

Does NSN 5310-00-916-4579 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-00-916-4579 was assigned to the Federal Catalog?

It was assigned 60 years ago, on Fri, Jul 15, 1966