5310-00-061-0131

Find complete technical information, availability, and procurement data for: 5310-00-061-0131
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5310-00-061-0131 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-00-061-0131

Item Name Code

13393

Assigment Date

01/01/1963 (63 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

round peripheral shape style, 0.271 inches minimum and 0.286 inches maximum hole diameter, rectangular cross-sectional shape style, 0.025 inches minimum and 0.035 inches maximum thickness, round center hole shape style

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Cross-Sectional Shape Style: rectangular
Hole Diameter: 0.271 inches minimum and 0.286 inches maximum
Peripheral Shape Style: round
Center Hole Shape Style: round
Thickness: 0.025 inches minimum and 0.035 inches maximum
Overall Diameter: 0.490 inches minimum and 0.510 inches maximum
Hardness Rating: 35.0 rockwell c minimum and 40.0 rockwell c maximum
Surface Finish: 63.0 microinches bottom
Surface Finish: 63.0 microinches top
Heat Treatment: as fabricated
Material: steel comp 4130 or steel comp 8630 overall
Material Document And Classification: ams 6350 assn std 1st material response and ams 6355 assn std 2nd material response overall
Surface Treatment: cadmium overall
Surface Treatment Document And Classification: ams 2400 assn std single treatment response overall

Replaces National Stock Numbers

Below is a list of NSNs that have been officially superseded by this NSN:

NSN	Name	Date
5310-00-578-4812	No Name Available	08/01/1985

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5310-00-061-0131?

The FSCG of the NSN 5310-00-061-0131 is 5310

Does the NSN 5310-00-061-0131 have a Schedule B code assigned?

Yes, the Schedule B code is 7318220000

Does NSN 5310-00-061-0131 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-00-061-0131 contain precious materials?

Item does not contain precious metal.

Does NSN 5310-00-061-0131 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5310-00-061-0131 was assigned to the Federal Catalog?

It was assigned 63 years ago, on Tue, Jan 1, 1963