67B45281-01

View detailed technical data, stock status, and sourcing information for: 67B45281-01
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 67B45281-01 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5315 Pins, Machine Keys and Nails

National Stock Number

5315-00-814-2082

Item Name Code

02384

Assigment Date

04/08/1968 (58 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

one end drilled hole arrangement style, pan no. 2 (r1 not required in item description) head style, 1.400 inches minimum and 1.420 inches maximum under head length, 0.031 inches nominal chamfer length, 0.4360 inches minimum and 0.4365 inches maximum diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Head Style: pan no. 2 (r1 not required in item description)
Chamfer Length: 0.031 inches nominal
Diameter: 0.4360 inches minimum and 0.4365 inches maximum
Under Head Length: 1.400 inches minimum and 1.420 inches maximum
Hole Arrangement Style: one end drilled
First Hole Diameter: 0.101 inches minimum and 0.116 inches maximum
Distance From Centerline Of Hole To End Of Pin: 0.093 inches nominal
Pin Chamfer Angle: 45.0 degrees nominal
Pin Head Diameter: 0.563 inches nominal
Height: 0.125 inches nominal
Material: steel comp 431 overall
Material Document And Classification: mil-s-18732 mil spec single material response overall
Style Designator: straight

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
2815948-501	Headed Straight Pin
5315PL0848077	Headed Straight Pin
5315PL1825554	Headed Straight Pin
67B45281-01	Headed Straight Pin

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5315-00-814-2082?

The FSCG of the NSN 5315-00-814-2082 is 5315

Does the NSN 5315-00-814-2082 have a Schedule B code assigned?

Yes, the Schedule B code is 7319409000

Does NSN 5315-00-814-2082 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5315-00-814-2082 contain precious materials?

Precious metal content is unknown

Does NSN 5315-00-814-2082 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5315-00-814-2082 was assigned to the Federal Catalog?

It was assigned 58 years ago, on Mon, Apr 8, 1968