100325-1
View detailed technical data, stock status, and sourcing information for: 100325-1
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 100325-1 to receive an up to date pricing and availability quote by email.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.
chamfered first end style, 0.2500 inches minimum and 0.2502 inches maximum diameter, 0.494 inches minimum and 0.514 inches maximum effective length, 1.345 inches minimum and 1.355 inches maximum overall length, 0.183 inches minimum and 0.198 inches maximum undercut diameter
Product Characteristics
Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.
- First End Style
- chamfered
- Overall Length
- 1.345 inches minimum and 1.355 inches maximum
- Diameter
- 0.2500 inches minimum and 0.2502 inches maximum
- Effective Length
- 0.494 inches minimum and 0.514 inches maximum
- Undercut Diameter
- 0.183 inches minimum and 0.198 inches maximum
- Undercut Width
- 0.302 inches minimum and 0.322 inches maximum
- Undercut Radius
- 0.151 inches minimum and 0.161 inches maximum
- First End Taper Length
- 0.015 inches nominal
- Second End Relationship With First End
- identical
- Hardness Rating
- 36.0 rockwell c minimum and 40.0 rockwell c maximum overall
- First End Location
- both ends
- First End Taper Angle
- 30.0 degrees nominal
- Surface Finish
- 63.0 microinches overall
- Material
- steel corrosion resisting overall
- Material Document And Classification
- qq-s-764 type 416 fed spec single material response overall
- Surface Treatment
- passivate overall
- Surface Treatment Document And Classification
- ess 001 81873 mfr ref single treatment response overall
- Style Designator
- groove
Related Parts
This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:
| Part Number | Name |
|---|---|
| 100325-1 | Headless Grooved Pin |
FAQs
Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.
What is the FSCG of the NSN 5315-00-461-4350?
Does the NSN 5315-00-461-4350 have a Schedule B code assigned?
Does NSN 5315-00-461-4350 require demilitarization?
Does NSN 5315-00-461-4350 contain precious materials?
Does NSN 5315-00-461-4350 contain hazardous materials?
When the NSN 5315-00-461-4350 was assigned to the Federal Catalog?
Professional Distribution
Certified to meet the strict requirements of defense, aerospace, and hazardous materials distribution.
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- AS9120 Quality Standards
- 100% Quality Inspections
You May Also Like
Browse other in-demand NSN parts sourced by professionals in defense, aerospace, and manufacturing sectors. Each component meets strict standards for quality and performance.
Pricing
Submit your request below and our team will respond quickly with up-to-date pricing, delivery estimates, and stock information:
