11626375

View detailed technical data, stock status, and sourcing information for: 11626375
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 11626375 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5315 Pins, Machine Keys and Nails

National Stock Number

5315-00-456-5948

Item Name Code

02384

Assigment Date

05/02/1969 (57 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.493 inches minimum and 0.500 inches maximum diameter, flat chamfer head style, 5.540 inches minimum and 5.560 inches maximum under head length, 0.060 inches nominal chamfer length, one end drilled hole arrangement style

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Head Style: flat chamfer
Chamfer Length: 0.060 inches nominal
Diameter: 0.493 inches minimum and 0.500 inches maximum
Under Head Length: 5.540 inches minimum and 5.560 inches maximum
Hole Arrangement Style: one end drilled
First Hole Diameter: 0.140 inches minimum and 0.150 inches maximum
Distance From Centerline Of Hole To End Of Pin: 0.140 inches minimum and 0.180 inches maximum
Pin Chamfer Angle: 45.0 degrees nominal
Pin Head Diameter: 0.620 inches nominal
Height: 0.190 inches nominal
Material: steel comp 1015 overall
Material Document And Classification: qq-s-631 fed spec all material responses overall
Surface Treatment: cadmium overall
Surface Treatment Document And Classification: qq-p-416,ty 2,cl 2 fed spec single treatment response overall
Style Designator: straight

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
11626375	Headed Straight Pin

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5315-00-456-5948?

The FSCG of the NSN 5315-00-456-5948 is 5315

Does the NSN 5315-00-456-5948 have a Schedule B code assigned?

Yes, the Schedule B code is 7319409000

Does NSN 5315-00-456-5948 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5315-00-456-5948 contain precious materials?

Precious metal content is unknown

Does NSN 5315-00-456-5948 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5315-00-456-5948 was assigned to the Federal Catalog?

It was assigned 57 years ago, on Fri, May 2, 1969