3040-01-518-2838

A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. For an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. Excludes:printed circuit board

slew brake end item identification, piston assembly: assemble piston into power plate using a shop press, take care not to damage the o-ring or polytetrafluoroethylene backup rings; visually align the center of the cutouts in the piston with the torque pin holes in the power plate; the depth the piston is installed into the power plate is critical; the surface of the piston at the cutouts must be flush to 0.120 below the surface of the power plate or piston will cock resulting in a complete loss of braking; piston disassembly: remove the piston from the power plate by introducing low pressure air (15 psi) into the hydraulic inlet; make sure piston is directed away operator; do not remove backup rings or o-ring unless replacement is necessary because they will be damaged special features