5962-01-578-1596

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

bipolar analog integrated circuit (switching regulator control circuit) part name assigned by controlling agency, complete pwm power control circuit, adjustable dead-time (0 to 100 percent); no double pulsing of same output during load transient condition, dual error amplifiers have wide common mode input voltage capability, circuit architecture provides easy synchronization, uncommitted outputs for 250-ma sink or source, with miss-operation prevention circuit for low level supply voltage, full pin-compatible tl494c special features