7025-01-522-1138

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

iso-compliant (7816) smart card format; cryptographic co-processor; on-board des hardware co-processor; 32k smart card operating system; 32 k eeprom; implements rsa/dsa key generation, rsa/dsa digitial signature, rsa and diffle-hellman key exchange; validation for fips 140-2 level 2; gsc-is v2.1 compliant; digitally signed executable programs supporting identrus, gsa multi-pin architecture, biometirc algorithms and card unblocking; blank; no reader included special features