7050-00-338-8950

A transformer consisting of one or more primary winding(s) and one or more secondary winding(s). It may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. Also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. For transformers having winding(s) common to both input and output circuits, see transformer (1), power, autotransformer. Excludes:transformer (1), pulse.

syncro/resolver to digital,angular range 0/360 deg continous rotation porm .01 deg,tracking rate no error 100 deg/sec,syncronizing time/180 deg step input/less than 0.5 sec,display 5 digit,7 segment leds,resolution .01 deg,reference input 115v porm 15.5 v rms or 26v porm 2.6 v rms,freq 400 porm hz,phase relative to signal porm 20 deg,input impedance 25 kohms min.,isolation transformer 1500v off ground,signal input syncro or resolver 11.8v/26v/90v,digital outputs shaft angle 5bcd buffered decades,analog output range porm 90 minutes,scale factor 100 mv/minute,output impedance 100 ohms,power input impedance 220v porm 10% rms,30 va maz,48-62 hz,19.00 in. w,3.47 in. h,13.88 in. dp,slide mtd on std 19 in. rack special features