TA0220055DC10HR

View detailed technical data, stock status, and sourcing information for: TA0220055DC10HR
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part TA0220055DC10HR to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-696-6004

Item Name Code

17532

Assigment Date

08/05/2021 (4 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.204 inches nominal diameter, 0.046 inches minimum and 0.054 inches maximum material thickness, round, unthreaded tongue hole type, 0.500 inches nominal overall width, special, air vehicle, aircraft end item identification

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Tongue Hole Type: round, unthreaded
Overall Width: 0.500 inches nominal
Diameter: 0.204 inches nominal
Material Thickness: 0.046 inches minimum and 0.054 inches maximum
End Item Identification: special, air vehicle, aircraft
Center To Center Distance Between Loop And Mounting Hole: 0.768 inches minimum and 0.798 inches maximum
Distance From Loop Center To Tongue End: 1.078 inches nominal
Loop Inside Diameter: 0.61 inches minimum and 0.64 inches maximum
Part Name Assigned By Controlling Agency: clamp,loop-cushioned,slotted,self-retaining
Material: aluminum alloy 2024 band
Material: rubber silicone class q cushion
Material Document And Classification: ams 3303 assn std single material response cushion
Material Document And Classification: ams-qq-a-250/5,heat treated to condition t4 per ams 2770 assn std single material response band
Surface Treatment: gold band
Surface Treatment Document And Classification: mil-c-5541,class 1a mil spec single treatment response band
Style Designator: single loop
Specification/Standard Data: 76823-9ng0012 manufacturers standard

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
40005D10HW	Loop Clamp
9NG0012D10HR	Loop Clamp
TA0220055DC10HR	Loop Clamp

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-696-6004?

The FSCG of the NSN 5340-01-696-6004 is 5340

Does NSN 5340-01-696-6004 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-696-6004 contain precious materials?

Item contains gold.

Does NSN 5340-01-696-6004 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-696-6004 was assigned to the Federal Catalog?

It was assigned 4 years ago, on Thu, Aug 5, 2021