5340-01-672-4352

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.

22 series exit device part name assigned by controlling agency, aluminum overall surface treatment, 4.250 inches nominal width, door swing - right hand; inside latch dimensions - 3.75 inch deep; outside trim - lever with keyed cylinder lock; outside lever dimensions - 3 inches long x 6.375 inches high x 2.625 inch deep; hex key dogging; fits standard 3 foot wide by 7 foot tall x 1.75 to 2.25 inch thick door; l - locking exterior trim - trim description 230l; cyl - cylinder lock latch type special features, 33.125 inches nominal length