27SPGHT130-175SS

View detailed technical data, stock status, and sourcing information for: 27SPGHT130-175SS
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 27SPGHT130-175SS to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-657-6621

Item Name Code

17532

Assigment Date

08/24/2016 (9 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

steel corrosion resisting overall material, uut adapter end item identification, 130.0 millimeters minimum and 175.0 millimeters maximum loop inside diameter, hi-torque spring claw clamp part name assigned by controlling agency, quick-release bandclamp special features

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

End Item Identification: uut adapter
Loop Inside Diameter: 130.0 millimeters minimum and 175.0 millimeters maximum
Part Name Assigned By Controlling Agency: hi-torque spring claw clamp
Special Features: quick-release bandclamp
Material: steel corrosion resisting overall

Replaces National Stock Numbers

Below is a list of NSNs that have been officially superseded by this NSN:

NSN	Name	Date
1680-01-658-1188	No Name Available	04/01/2017

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
27SPG-HT130-175SS	Loop Clamp
27SPGHT130-175SS	Loop Clamp

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-657-6621?

The FSCG of the NSN 5340-01-657-6621 is 5340

Does NSN 5340-01-657-6621 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-657-6621 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-657-6621 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-657-6621 was assigned to the Federal Catalog?

It was assigned 9 years ago, on Wed, Aug 24, 2016