5340-01-645-3709

Find complete technical information, availability, and procurement data for: 5340-01-645-3709
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-01-645-3709 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-645-3709

Item Name Code

29785

Assigment Date

06/12/2015 (11 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.129 inches nominal bolt circle diameter, flat cross-sectional shape style, 1.594 inches nominal length, rectangle, rounded corners, multi holes peripheral shape style, 0.781 inches nominal width

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Cross-Sectional Shape Style: flat
Width: 0.781 inches nominal
Bolt Circle Diameter: 0.129 inches nominal
Peripheral Shape Style: rectangle, rounded corners, multi holes
Length: 1.594 inches nominal
Corner Radius: 0.078 inches nominal
Hole Quantity Along Length: 2
Hole Quantity Along Width: 2
Distance Between Holes Along Length: 1.375 inches nominal
Distance Between Holes Along Width: 0.563 inches nominal
Distance From First Hole Centerline To End Along Length: 1.484 inches nominal
Distance From First Hole Centerline To End Along Width: 0.672 inches nominal
Body Thickness: 0.063 inches nominal
Securing Device Type: threaded fastener
End Item Identification: a/f37t-17a
Part Name Assigned By Controlling Agency: cover pushrod gear box throttle

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
3654AS7919-1	Access Cover

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-645-3709?

The FSCG of the NSN 5340-01-645-3709 is 5340

Does NSN 5340-01-645-3709 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-645-3709 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-645-3709 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-645-3709 was assigned to the Federal Catalog?

It was assigned 11 years ago, on Fri, Jun 12, 2015