7-511113876-003

View detailed technical data, stock status, and sourcing information for: 7-511113876-003
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 7-511113876-003 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-633-4329

Item Name Code

02385

Assigment Date

11/21/2014 (11 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

ah-64d end item identification, clip, lh-lwr, flare part name assigned by controlling agency, qq-a-250/4, alloy 2024, t4 fed spec single material response material document and classification, 0.040 inches nominal stock diameter, aluminum alloy 2024 material

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Stock Diameter: 0.040 inches nominal
End Item Identification: ah-64d
Part Name Assigned By Controlling Agency: clip, lh-lwr, flare
Material: aluminum alloy 2024
Material Document And Classification: qq-a-250/4, alloy 2024, t4 fed spec single material response

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
7-511113876-003	Retaining Clip

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-633-4329?

The FSCG of the NSN 5340-01-633-4329 is 5340

Does NSN 5340-01-633-4329 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-633-4329 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-633-4329 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-633-4329 was assigned to the Federal Catalog?

It was assigned 11 years ago, on Fri, Nov 21, 2014