TA02112H106WC

View detailed technical data, stock status, and sourcing information for: TA02112H106WC
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part TA02112H106WC to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-509-4233

Item Name Code

17532

Assigment Date

06/20/2003 (23 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.770 inches minimum and 0.850 inches maximum distance from loop center to tongue end, 0.030 inches nominal material thickness, 0.375 inches nominal loop inside diameter, 0.490 inches minimum and 0.510 inches maximum overall width, 0.562 inches minimum and 0.622 inches maximum center to center distance between loop and mounting hole

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Overall Width: 0.490 inches minimum and 0.510 inches maximum
Material Thickness: 0.030 inches nominal
Center To Center Distance Between Loop And Mounting Hole: 0.562 inches minimum and 0.622 inches maximum
Distance From Loop Center To Tongue End: 0.770 inches minimum and 0.850 inches maximum
Loop Inside Diameter: 0.375 inches nominal
Material: plastic polytetrafluoroethylene and glass fiber cushion
Material: steel comp 321 band
Style Designator: single loop

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
GC500B6	Loop Clamp
TA02112H106WC	Loop Clamp

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-509-4233?

The FSCG of the NSN 5340-01-509-4233 is 5340

Does NSN 5340-01-509-4233 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-509-4233 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-509-4233 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-509-4233 was assigned to the Federal Catalog?

It was assigned 23 years ago, on Fri, Jun 20, 2003