1500AS234-1

View detailed technical data, stock status, and sourcing information for: 1500AS234-1
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 1500AS234-1 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-498-8832

Item Name Code

42735

Assigment Date

07/03/2002 (24 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

unable to decode surface treatment and location, 1.562 inches nominal inside width, unable to decode material and location, cons ground support equip; console gse end item identification, 4.000 inches nominal overall height

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Overall Height: 4.000 inches nominal
Inside Width: 1.562 inches nominal
End Item Identification: cons ground support equip; console gse
Material And Location: unable to decode
Surface Treatment And Location: unable to decode
Frame Style: swivel
Special Features: item consists of l-shaped bracket with 2 side plates welded on; bottom of bracket has hole (0.438-0.444 inch in diameter, drilled thru and chamfered 0.016-0.046 x 45 degrees) for swivel caster
Supplementary Features: adapter, swivel wheel

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
1500AS234-1	Caster Frame

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-498-8832?

The FSCG of the NSN 5340-01-498-8832 is 5340

Does the NSN 5340-01-498-8832 have a Schedule B code assigned?

Yes, the Schedule B code is 8302200000

Does NSN 5340-01-498-8832 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-498-8832 contain precious materials?

Precious metal content is unknown

Does NSN 5340-01-498-8832 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-498-8832 was assigned to the Federal Catalog?

It was assigned 24 years ago, on Wed, Jul 3, 2002